Guidance for configuring netstick
לעברית לחצו כאן
APN settings
Most netsticks do not require special configuration and they connect automatically, but if the netstick does not connect to the Internet, the should configure the connection according to the following settings:
Note! The location and names of the settings differ slightly between netstick and netstick
You can usually find the apn settings in the netstick interface under the header "Configure Profile Settings" or "APN Settings" "Connection Profile" "Connection Settings" "Network Settings":
In the profile name it does not matter what to write. Additional settings like User Name & Password & Dial Number usually should be keft empty. if a dial Number is needed it should be 
.
| company | APN |
|---|---|
| 019 | 019 |
| x2One | apn.x2one.com |
| Sim Kasher | ksim
Hot-Mobile only: netfree.hotm |
| RL | iisp |
After setting the desired settings, choose either Apply or Ok or Save. Usually, you return to the APN screen. Select the profile you have set and make it default (usually pressing set as defult).
If these settings are configured correctly but there is still no Internet connection:
Roaming data should be enabled.
In the authentication configuration (Protocol/Authentication) you need to set NONE or CHAP or PAP (Try what works).
ב - PDP Type set ip or ipv4.
And also perform a manual network search (usually under the Select Network header) and select the appropriate network, Automatic or Manual. Also note that you are not connected to the 2G which is called GSM or GPRS or EDGE, and if you have a 4G netstick, it is recommended to connect to the 4G to use the speed optimally, but sometimes 3G browsing in certain places faster than browsing in 4G.
Slow cellular surfing
See here, expanded entry